nobady98
帖子: 5
注册时间: 2011-11-06 19:01

壓制時跳出『av_init_packet』的問題

原本是這樣的問題
图片
http://i.imgur.com/0f1biSm.jpg

之後搞一搞現在變成這樣子
图片
http://i.imgur.com/Tsxh9dn.jpg
如圖

avs沒什麼,就只是一個純黑屏幕的視頻
BlankClip(length=8016, width=1280, height=360, fps=23.976, color=$000000)

好像是安裝格式工廠之後才有這問題(沒安裝格式工廠內建解碼)
雖然還是能壓制,但是不知道這個該怎麼解決啊,求眾菊苣幫忙解決 {:cat_5}
头像
msg7086
帖子: 600
注册时间: 2011-02-19 0:49

Re: 壓制時跳出『av_init_packet』的問題

用VDM/avsp能打开么?
Delogo LGD Collections 各种台标下载 | Home Of VapourSynth Evolution

<回答が無い理由>
1. 誰も知らない
2. 質問文が意味不明
3. 知ってるが、お前の態度が気に入らない
4. 良いボケが思いつかない
头像
Billy Herrington
帖子: 83
注册时间: 2013-01-09 9:54

Re: 壓制時跳出『av_init_packet』的問題

BlankClip(length=8016, width=1280, height=360, fps=23.976, color=$000000)
-->
BlankClip(length=8016, width=1280, height=360, fps=24000, fps_denominator=1001, color=$000000).KillAudio()
nobady98
帖子: 5
注册时间: 2011-11-06 19:01

Re: 壓制時跳出『av_init_packet』的問題

msg7086 写了:用VDM/avsp能打开么?
能打開,只有在要開始壓制的初始會跳出來
Billy Herrington 写了:BlankClip(length=8016, width=1280, height=360, fps=23.976, color=$000000)
-->
BlankClip(length=8016, width=1280, height=360, fps=24000, fps_denominator=1001, color=$000000).KillAudio()
試過了,還是一樣。。。
头像
Billy Herrington
帖子: 83
注册时间: 2013-01-09 9:54

Re: 壓制時跳出『av_init_packet』的問題

add --acodec none
nobady98
帖子: 5
注册时间: 2011-11-06 19:01

Re: 壓制時跳出『av_init_packet』的問題

Billy Herrington 写了:add --acodec none
還是沒用啊。。。今天重灌後一樣有這問題,我開始懷疑我是不是哪個東西沒安裝到了

算了。。。能壓就好,應該不會出什麼問題吧- -?
头像
Billy Herrington
帖子: 83
注册时间: 2013-01-09 9:54

Re: 壓制時跳出『av_init_packet』的問題

since you don't need audio encoding or lavf/ffms decoding, why not use lite version which would never try av_* stuffs

回到 “视频编码器 / Video encoder discussion”