lwjkk666
帖子: 321
注册时间: 2012-05-29 13:43

Re: 一些x265的参数测试结论分享,希望可以让后来的测试者少做些重复工作,也希望其他一些做过测试的来分享一些结论

L大有无关于新版2,0真人那些编码设置推荐一下,貌似很久没更新过了
rainy miuco
帖子: 9
注册时间: 2016-09-19 23:02

Re: 一些x265的参数测试结论分享,希望可以让后来的测试者少做些重复工作,也希望其他一些做过测试的来分享一些结论

lwjkk666 写了:L大有无关于新版2,0真人那些编码设置推荐一下,貌似很久没更新过了
vcb-s 2月7日发布的“μ’s Final LoveLive!”(真人)编码设置:【与http://vcb-s.nmm-hd.org/教程10常用的参数的不同,已用符号“#”标记】
wpp / ctu=32 / min-cu-size=8 / max-tu-size=32 / tu-intra-depth=2 / tu-inter-depth=2 / me=3 / subme=4 / merange=44 / no-rect / no-amp / max-merge=3 / temporal-mvp / no-early-skip / rskip / rdpenalty=0 / no-tskip / no-tskip-fast / no-strong-intra-smoothing / no-lossless / no-cu-lossless / no-constrained-intra / no-fast-intra / no-open-gop / no-temporal-layers / interlace=0 / keyint=360 / min-keyint=1 / scenecut=40 / rc-lookahead=72 / lookahead-slices=4 / bframes=6 / bframe-bias=0 / b-adapt=2 / ref=4 / limit-refs=2 / limit-modes / weightp / weightb / #aq-mode=1# / qg-size=16 /
#aq-strength=1.00#
/ #cbqpoffs=-3# / #crqpoffs=-3# / rd=4 / psy-rd=2.00 / rdoq-level=2 / psy-rdoq=3.00 / no-rd-refine / signhide /
#deblock=-2:-2# /
no-sao / no-sao-non-deblock / b-pyramid / cutree / no-intra-refresh / rc=crf /
#crf=21.0# / #qcomp=0.60# / qpmin=0 / qpmax=51 / qpstep=4 / ipratio=1.40 / pbratio=1.20
lyglay1991
帖子: 33
注册时间: 2013-01-05 18:15

Re: 一些x265的参数测试结论分享,希望可以让后来的测试者少做些重复工作,也希望其他一些做过测试的来分享一些结论

lwjkk666 写了:L大有无关于新版2,0真人那些编码设置推荐一下,貌似很久没更新过了
yuuki版265 --tune vcb-s / vcb-s++,适用于真人压制
lwjkk666
帖子: 321
注册时间: 2012-05-29 13:43

Re: 一些x265的参数测试结论分享,希望可以让后来的测试者少做些重复工作,也希望其他一些做过测试的来分享一些结论

lyglay1991 写了:
lwjkk666 写了:L大有无关于新版2,0真人那些编码设置推荐一下,貌似很久没更新过了
yuuki版265 --tune vcb-s / vcb-s++,适用于真人压制
好的感谢回复
lwjkk666
帖子: 321
注册时间: 2012-05-29 13:43

Re: 一些x265的参数测试结论分享,希望可以让后来的测试者少做些重复工作,也希望其他一些做过测试的来分享一些结论

X265 Version 2.3
Encoder enhancements
New SSIM-based RD-cost computation for improved visual quality, and efficiency; use --ssim-rdto exercise.
Multi-pass encoding can now share analysis information from prior passes (in addition to rate-control information) to improve performance and quality of subsequent passes; to your multi-pass command-lines that use the --pass option, add --multi-pass-opt-distortion to share distortion information, and --multi-pass-opt-analysis to share other analysis information.
A dedicated thread pool for lookahead can now be specified with --lookahead-threads.
option:–dynamic-rd dynamically increase analysis in areas where the bitrate is being capped by VBV; works for both CRF and ABR encodes with VBV settings.
The number of bits used to signal the delta-QP can be optimized with the --opt-cu-delta-qpoption; found to be useful in some scenarios for lower bitrate targets.
Experimental feature option:–aq-motion adds new QP offsets based on relative motion of a block with respect to the movement of the frame.
API changes
Reconfigure API now supports signalling new scaling lists.
x265 application’s csv functionality now reports time (in milliseconds) taken to encode each frame.
--strict-cbr enables stricter bitrate adherence by adding filler bits when achieved bitrate is lower than the target; earlier, it was only reacting when the achieved rate was higher.
--hdr can be used to ensure that max-cll and max-fall values are always signaled (even if 0,0).
Bug fixes
Fixed incorrect HW thread counting on MacOS platform.
Fixed scaling lists support for 4:4:4 videos.
Inconsistent output fix for --opt-qp-pss by removing last slice’s QP from cost calculation.
VTune profiling (enabled using ENABLE_VTUNE CMake option) now also works with 2017 VTune builds.
qzkszj
帖子: 1
注册时间: 2019-10-23 19:26

Re: 一些x265的参数测试结论分享,希望可以让后来的测试者少做些重复工作,也希望其他一些做过测试的来分享一些结论

个人做了一下关于merange的测试,版本是3.2,源是dota,你的名字彗星坠落那段和tears of steel
除了merange,其他参数是这样的:
--preset slower --no-amp --limit-refs=3 --rd=4
(拥有slower340%的速度和~103%的同画质体积)
第一列是merange大小,第二列是速度增幅,第三列是BD-rate(用psnr计算)
25 | +7.46% | +0.74%
38 | +4.55% | +0.32%
44 | +3.36% | +0.13%
这样看下来38好像都有点小了?
而且速度增幅好像并没有前人说的那么大。
tell me if I'm wrong.
上次由 qzkszj 在 2019-10-23 19:41,总共编辑 1 次。
bloodhood
帖子: 3
注册时间: 2018-06-06 2:21

Re: 一些x265的参数测试结论分享,希望可以让后来的测试者少做些重复工作,也希望其他一些做过测试的来分享一些结论

现在出来的--hevc-ap不知道有没有相关的测试,和传统的aq-mode(1,2,3)有什么区别,有提升没有,还有一个与之对应的--qp-adaptation-range
chankaitat
帖子: 2
注册时间: 2017-04-14 23:12

Re: 一些x265的参数测试结论分享,希望可以让后来的测试者少做些重复工作,也希望其他一些做过测试的来分享一些结论

lwjkk666 写了: 2017-02-22 15:49
lyglay1991 写了:
lwjkk666 写了:L大有无关于新版2,0真人那些编码设置推荐一下,貌似很久没更新过了
yuuki版265 --tune vcb-s / vcb-s++,适用于真人压制
好的感谢回复
vcb-s 和 vcb-s++ 哪个是更好些呢?压完用mediainfo看的参数都是一样的。。。但文件大小不同
dtlnor
帖子: 3
注册时间: 2021-11-29 10:37

Re: 一些x265的参数测试结论分享,希望可以让后来的测试者少做些重复工作,也希望其他一些做过测试的来分享一些结论

chankaitat 写了: 2021-09-05 9:26
lwjkk666 写了: 2017-02-22 15:49
lyglay1991 写了:
yuuki版265 --tune vcb-s / vcb-s++,适用于真人压制
好的感谢回复
vcb-s 和 vcb-s++ 哪个是更好些呢?压完用mediainfo看的参数都是一样的。。。但文件大小不同
https://github.com/msg7086/x265-Yuuki-A ... /param.cpp
这里可以看到参数,多了++则会添加以下参数:
(ref < 3)? -> --ref 3
--b-intra
--rect
--limit-tu 4
(rc-lookahead < 60)? -> --rc-lookahead 60
--merange 38

回到 “视频编码器 / Video encoder discussion”